Work/Platform architecture

Project record 01 / Platform architecture

Four products. One deliberate architecture.

Shared mechanisms only create value when the variant requirements, interfaces, and supplier assumptions stay under control.

Responsibility

Architecture, requirements, shared interfaces, BOM strategy, CTQs, first-article planning, supplier RFQ controls, and validation gates.

Project stage

Architecture + supplier definition

Context

Independent consulting
Anonymized public record

The governing question

What should be common, and what must remain specific to each product?

Four related manual-adjustment products needed shared mechanisms and supplier definition without allowing common parts, purchased components, or assumptions to conceal variant risk.

Commonality + control
01Shared architecture02Variant requirements03Controlled BOM04Supplier definition

Editorial schematic of the engineering scope. Not product geometry.

Engineering decisions

Commonality is an engineering decision, not a parts-count exercise.

A common mechanism can simplify sourcing and assembly, but each variant still needs a defensible load case, operating envelope, guarding approach, and acceptance plan. I treated those boundaries as part of the architecture.

01

Define the family before the parts.

Separated shared requirements and interfaces from variant-specific definition, so a common component didn’t silently become a common assumption.

02

Connect mechanism choices to use and manufacture.

Developed manual hand-crank and handwheel architectures with guarded access, tying adjustment behavior to packaging and supplier definition.

03

Make the quotation package technically useful.

Connected the controlled BOM to critical-to-quality characteristics, first-article planning, test matrices, supplier questions, and deviation tracking.

4product variants
312controlled BOM rows
199purchased/COTS lines

What the work produced

A coordinated architecture and supplier-definition package, with variant requirements, inspection inputs, and quotation controls.

  • Architecture record
  • Variant requirements
  • BOM strategy
  • CTQ and inspection definitions
  • Supplier RFQ controls
Completion state

Architecture and supplier-quotation package. Fabrication release, final drawings, and physical validation were outside the completed scope.

Continue exploring

Modular thermal product development

Next project

A similar challenge?

Bring the current design, the governing constraints, and the decision the team needs to make.

Discuss your project