Work/Integrated product development

Project record 02 / Integrated product development

Thermal architecture is interface architecture.

A modular thermal product brought containment, thermal contact, sealing, condensation, assembly, and service into the same design problem.

Responsibility

Mechanical architecture, interface definition, controlled CAD iteration, configuration development, and prototype and patent support.

Project stage

Concept + prototype definition

Context

Independent consulting
Anonymized public record

The governing question

How do the thermal function, enclosure, and user interaction work as one product?

A consumer thermal product required repeated architecture and CAD revision to reconcile a master shell, liner, thermal cartridge, top interface, containment, sealing, condensation, assembly, service, and user interaction.

Coupled interfaces
01Master shell02Liner03Thermal cartridge04Top interface

Editorial schematic of the engineering scope. Not product geometry.

Engineering decisions

An interface change rarely stays at one interface.

A change to a cartridge or closure can affect contact, leakage paths, assembly sequence, cleaning, and service access. The development record connected those decisions instead of treating each part as a separate design task.

01

Develop the product as an assembly.

Defined the master shell, liner, thermal cartridge, and top interface together, with attention to their mechanical relationships and replaceable components.

02

Work through the coupled details.

Revised sealing, containment, condensation paths, access, assembly order, and service through the same controlled development sequence.

03

Keep the next iteration traceable.

Maintained native SOLIDWORKS parts, assemblies, configurations, and eight archived revisions to support prototype and patent-related decisions.

8archived CAD revisions
4core assembly elements
CADnative parts + assemblies

What the work produced

An integrated concept and prototype definition with controlled configurations and a clear set of physical questions to verify.

  • Native SolidWorks parts and assembly
  • Alternate configurations
  • Eight-revision development sequence
  • Prototype and patent-support definition
Completion state

Concept and prototype definition across eight CAD revisions. Cooling performance, leakage, condensation, and production processes still require physical verification.

Continue exploring

Fit-critical geometry reconstruction

Next project

A similar challenge?

Bring the current design, the governing constraints, and the decision the team needs to make.

Discuss your project